Speed Cups: Anleitung, Rezension und Videos auf realkempokarate.com Bei Speed Cups werden Becher gestapelt. Sie sind etwas größer als Likörgläser, bunt und aus. Auf dieser Seite findest du die Speed Cups 6 Spielregeln und ein Video zum Spiel. Jetzt klicken zum Download der Anleitung oder für den Link zum Review! Rapid Cups: Anleitung, Rezension und Videos auf realkempokarate.com In Rapid Cups stapeln Spieler Becher aufeinander. Um einen Becher auf einen bereits.
Speed Cups 6Auf dieser Seite findest du die Speed Cups 6 Spielregeln und ein Video zum Spiel. Jetzt klicken zum Download der Anleitung oder für den Link zum Review! Speed Cups: Anleitung, Rezension und Videos auf realkempokarate.com Bei Speed Cups werden Becher gestapelt. Sie sind etwas größer als Likörgläser, bunt und aus. CUPS. Ausbaufähige Anleitung. Dieser Anleitung fehlen noch einige Informationen. Wenn Du etwas verbessern kannst, dann editiere den Beitrag, um die Qualität.
Cups Anleitung The software VideoThe Cup Song - TUTORIAL! [deutsch]
Then, when you add a cup, it will help to keep you in time. Not Helpful 32 Helpful Ava Cacckello. You have to keep up with the rhythm of the song.
Study the beat carefully before you use the cup. Not Helpful 24 Helpful No, you can use pretty much any solid object, as long as it's stable on both top and bottom.
It won't make the game easier, but you can do it. Not Helpful 52 Helpful If you hit it hard enough on the table, yes.
So don't use a glass cup unless you're prepared to pick up glass. Not Helpful 43 Helpful You might need someone to hand you the cups.
You could do one cup, then push it away, and your extra person could pass you the next cup. Not Helpful 39 Helpful In the house, your school cafeteria, at work Not Helpful 49 Helpful Include your email address to get a message when this question is answered.
By using this service, some information may be shared with YouTube. Perform the Cup Song on a table or other hard surface for best results.
Helpful 25 Not Helpful 5. Helpful 21 Not Helpful 5. Use a plastic cup. This is especially important when practicing. Only graduate to a glass cup once you feel very comfortable with the movements.
Helpful 22 Not Helpful 7. Submit a Tip All tip submissions are carefully reviewed before being published. The cup song takes a lot of practice.
Helpful 28 Not Helpful Helpful 9 Not Helpful 2. Related wikiHows. More References 6. About This Article.
Co-authored by:. Co-authors: Updated: November 13, Article Summary X To do the cup song, start by placing a cup rim-side down in front of you.
Nederlands: De Cup song doen. Italiano: Imparare la Canzone del Bicchiere. Bahasa Indonesia: Melakukan Cup Song. Thanks to all authors for creating a page that has been read 1,, times.
Categories Arts and Entertainment Music Songs. I had some troubles with this, because I first connected my printer through a powered usb hub on disk1, because on disk2 I have a 2Gb flashdisk for unslung and on the hub I had two usb hd Gb and Gb.
I noticed that if I connected the printer directly to disk1. It was getting recognized as above and not like before I only got the first two lines.
Now I only had the problem where I could connect my 2 hd disks. Luckily if you have some soldering skills like I you can expand the slug with three extra usb ports.
So I did that and added the three extra ports. Now I have connected my printer to port 5 of the slug.
I also didn't change anything in the printers. To print from Windows, you may configure Samba as print server as described below. You just add a new network printer and enter your printer URL e.
When prompted for the driver installation, simply select the appropriate driver for your printer. This is the easiest way for you to print from Windows.
When finish with the guide, ensure that the "Device URl? If not, reenter it and you are done. You can now print the test page.
When it comes to integrating with Samba 2 the one found as standard in the Linksys firmware and Unslung 2. The steps are as follows note that there is a scripts at the end of this section that does all the steps - the spelling out here is to show what is going on :.
The script does NOT handle step 1. Make the spool directory yourself. I got it working with chmod , as gave me an Access Denied error when trying to print from Windows.
Note that all these settings will probably be deleted by the Linksys SW on reboot. The normal way of doing this is using the Samba utility smbspool.
Unfortunately Linksys decided not to include it in the NSLU2 firmware, so unless one installs the Samba 3 package, this seems to be a difficult task.
The basic CUPS installation does not as yet install its own printer drivers, but relies on the applications formatting the output correctly for the printer.
We expect printer definitions for some popular printers to be tested real soon. Defining the printer in the CUPS web interface lets you choose between a limited set of printer definitions.
Starting version 1. I've had to do some strange things to get my setup functional. For scanning, using the guides here to set up my scanner worked well.
This is using hplip since I have a psc all in one printer. Ive set up my printer with the hplip hpcup driver not for printing, which I couldn't get to work, but so the hplip utilities can be used.
I can use the hp-level and other commands to interrogate my printer to get status and ink levels. I created my own webpage to give me ink status.
HPLIP does not work for printing, seems to have some problems, probably related to the optware conversion or building setup.
By the way, if you use any hplip function such as scanning or checking ink, this knocks out the usblp module so I have a script to check this and remove and restore the module so I can print again.
Most of the problems were related again to not quite being optware conformant. This should have worked for every ghostscript call but I had to manually edit the PPDs?
I had to modify this script for optware and fix its permission. I also had to install bc for calculations. To get the corresponding pdftops utility, I first installed xpdf.
This did not turn out well since manually converting a pdf file to ps and sending it directly to the printer device would lock up the printer.
Is it worried about getting in trouble if it doesn't do what it's told? Say: Robots can only do what they've been told to do, but we don't just tell them using words.
In order to do something, a robot needs to have a list of steps that it can read. Today, we are going to learn what it takes to make that happen.
Don't forget to model this in front of the class until students understand all of the rules. If it's still confusing, try running this whole activity together as a classroom using volunteers as robots, instead of breaking up into groups!
Intensify: Are your students more advanced? Do you want this lesson to relate more closely to the online puzzles?
Here are some modifications that you can make:. Display: Display the resource mrf-symbols-b not found or write the allowed actions on the board - make sure these are in a place where they can be seen for the whole activity.
Explain to the class that these will be the only four actions that they can use for this exercise. Model: In order to explain how the instructions are intended to work, model for the class how to create and follow an algorithm for replicating a simple pattern.
Place a single stack of cups in front of you to start. Display: Hold up the pattern you plan to model. A simple three cup pattern is a great place to start.
Prompt: Ask the class what the first instruction should be, using only the four instructions allowed. The first move should be to "pick up cup. If they suggest something not from the list, make a clear malfunction reaction and let them know that the command is not understood.
With cup in hand, ask the class to continue giving you instructions until the first cup is placed. This is a great place to clarify that "step forward" and "step backward" each imply moving half a cup width.
See the image below for reference. Once your stack is complete, point out that they just gave you a list of steps for completing a task.
That's an algorithm. Algorithms are great for sharing ideas, but spelling them out word by word can take a long time. That's what the symbols are for!
When you change an algorithm into symbols that a robot or computer understands, that's called programming.
Ask the class to help you write the "program" for that first move by changing the text into an arrow. Then work with them to write down the rest of the moves necessary to complete the pattern.